Choose the right size for you, from 2GB to Unlimited. No smartphone? Connect your basic phone, tablet, hotspot or connected device to America’s best network. No annual contract. Monthly plans for your smartphone or connected device.

Find a plan for your business, no matter how big or small. Connect from abroad or reach out to 200+ countries while in the U.S. Connect tablets, hotspots and other devices on a shared data-only plan. Back up your content, personalize your device and more. Store photos, videos, contacts, music, documents, call logs and text messages.

Coverage for damage, loss, theft and Verizon Tech Coach support Estimate your expected monthly payments in two steps.

Rooting an Android device has many privileges. Having rooted your phone once, you are able to use third-party custom ROMs and mods that require a custom recovery to be installed. Besides, there are hundreds,or say thousands, of app that are capable of doing wondrous things and enhance your phones performance and usability. But this humble eulogy of rooting cannot undermine the hazards associated with it. Rooting a Samsung Galaxy device is much easier than rooting any device manufactured by other OEMs but when it comes to rooting a Samsung phone from Verizon, things get a little more complicated and rounded. However, complicated it might be, it cannot stop our great Devs to crack the nut.

All props and credit for the method described here goes to XDA member. Please note that the procedure of unlocking the bootloader, rooting and installing a custom recovery on your Verizon Galaxy S3 SCH-I535 is considered risky.

Moreover, it will also void the warranty of your phone. Proceed only when you are sure what you are going to do and understand the seriousness of things.

More than anything, be careful while following the steps. Andal Thiruppavai Lyrics In Tamil Pdf Free Download on this page. Prerequisites: • Charge your phone to have at least 60% of battery juice. • Rooting does not wipe any data from your phone but we would strongly recommend that you backup all your contacts, messages, call-log, apps, etc. Here are to help you with backing up your data. • Put your device in USB Debugging mode from Settings>Developer Options>Method 1 (VRBLK3, MB1 & MD3 Builds) Required Downloads: Since this tutorial is for Galaxy S3 I535 on Android 4.1.1 and 4.1.2 both, download the files accordingly- only different being the stock bootchain file. For the sake of convenience put all the downloaded files in one folder. These are important but mandatory files.

If you have them, just skip: • Download the Odin tool and extract the zip on your desktop: — • Download Samsung USB Drivers and install on your computer. Skip if you already have it: These two files are meant to be downloaded by all: • Download the custom Bootchain file: — • Download CWM Recovery: — Download one of the following files depending on what you want: • Download SuperSU file (for Root Only): • Download SuperUser file to (Root and Unlock Bootloader both): — Download one of the following bootchain files depending on firmware version of your Galaxy S3 SCH-I535: Make sure you download the correct file. Go to Settings>About, check firmware version and download the matching file.

• Bootchain file for VRBLK3 (Android 4.1.1 JB): — • Bootchain file for VRBMB1 (Android 4.1.2 JB): — • Bootchain file for VRBMD3 (Android 4.1.2 JB): — Note: If you have recently updated your Galaxy S3 with official VRBLMD3 OTA update, you should choose VRBMD3_Bootchain.tar.md5 from above. And if you have updated your device with the recently released VRBMF1 update, use Method 3 to root your phone. Don Not Miss! Root, Unlock Bootloader and Install CWM: Note: If you see the following message in CWM after Step #10 below or anytime later: ROM may flash stock recovery on boot.

THIS CAN NOT BE UNDONE. – NO – YES – Disable recovery flash” Please select “YES” otherwise CWM will be replaced by Stock Recovery and then you’ll have to do all steps again. Already made the preparations and downloaded the required stuff? It’s action time now.

Hard resets on any smartphone, pattern resets for android phone, master reset, htc, soft resets, master resets, htc, samsung,lg, motorola,zte, sanyo, lte phones, sprint hard reset, verizon hard reset. Pageplus, revol, h20, t-mobile internet settings, airvoice, simple mobile, metro pcs, obama phone help, help with your.

Proceed carefully- • Copy the “SuperSU_Bootloader_FIXED.zip” file to your phone’s internal or external SD card. • Turn off your Galaxy S3 and boot it into Download mode: hold the Volume Down + Home + Powerbuttons simultaneously for a few seconds till you see a warning screen asking you to press Volume Up key to continue. Pressing this key will take you to Download or Odin mode. • Open the Odin folder and run the.exe file present there. When Odin window is opened, connect your Galaxy S3 to PC via USB cable.

Wait till Odin detects your device and you see ID:COM port turning Blue and “Added!!”text at the message box below. • Now we will flash the custom bootchain file so make sure that “Auto Reboot”and “F Reset Time” are selected on Odin. Then click the PDA button and select the “ VRALEC.bootchain.tar.md5″ file and click on “Start” button on Odin. • The bootchain file will be flashed in a few seconds and you will see “RESET!!” message with blue signal. Your phone will reboot automatically. Close the Odin window and disconnect the USB cable.

• Now you need to install the ClockworkMod touch recovery. To install it, boot the phone into Download mode again (as you did in Step #2 above). • Relaunch the Odin, connect the phone using the cable and uncheck the “Auto Reboot” option on Odin. • Click on the PDA button, select the “CWM6023TouchVZW.tar.md5” file and hit the Start button. • CWM Recovery will be flashed to your phone followed by “PASS!!”. This time your phone will not reboot automatically. Close the Odin window and disconnect the USB cable.

• Now pull out the back cover of the phone and remove the battery. Place the battery to its place after about 30 seconds. • Then boot the phone into ClockworkMod recovery mode. To do this, hold the Volume Up + Home + Power buttons simultaneously.

Keep the 3 keys pressed till your phone vibrates and when it does, release the Power button but keep the other 2 keys pressed till you see a gray/black background with blue text the C lockworkmod Recovery written on the top of the screen. • Since it’s touch recovery, you can either select options by tapping, or using the volume and power keys. • Okay, now go to “install zip from sdcard>choose zip from sdcard” and select the “SuperSU_Bootloader_FIXED.zip” file. • Confirm your choice by selecting “yes” and let the installation finish. • When it’s done, go back and select “reboot system now”. But before your phone boots, pull out the battery and place it back after a few seconds.

• Once again, and for the third time. You will have to boot the device in Download Mode. You know well how to do it. • Relaunch Odin, connect the phone to PC, click on PDA button and select the stock bootchain file (either VRBLK3 or VRBMB1 or VRBMD3) depending on what file you have downloaded. • Click the Start button to initiate the installation. When it is finished, you will see PASS!/RESET!

Message followed by an automatic reboot of your Galaxy S3. You can disconnect the cable now. Method 2 (for Rooting VRBMF1 Build). Okay, I finally decided to try root and install Cyanogenmod stable version 10.1.2vzw on my Verizon(i535VRBMF1) Galaxy S3 Android 4.1.2. I installed usb drivers and used Casual Root Tool to root the phone. Everything was up and running and working well.

But I could never boot up into recovery mode/TWRP from a shutdown using volume down, middle button, & power. It said it was downloading, but nothing else would happen.

So I installed TWRP and was able to wipe the phone and install CM. But like I said, everything was working fine until Cyanogenmod told me there was an update. So I clicked on it to update, and it went into TWRP and did the update (cm-4-SNAPSHOT).

But then the phone would not boot up. So I shut it off and TWRP came up again. So I flashed CM 10.1.2vzw again. But I did not flash the google apps and did not wipe anything. It booted up, but certain apps wouldn’t work like Google Play app. TWRP app was gone.

So I hooked up the USB cable to my PC in hope that maybe I could run Casual Root tool again and do what I did before. But Casual root tool does not recognize the phone even though I can access the phone through the usb. So then I decided I would go into settings in CM and do a backup & reset. (I know I am an idiot and should have probably stopped messing with things.) Now, I can boot into CM, but no Google apps. No play store app.

Can’t install Helium to restore my apps. Can’t hit volume down, middle button, & power button to go into recovery from a shutdown because that never worked. Don’t have a clue what to do now!!!??? I even installed Odin but phone isn’t recognized. Any help would be appreciated!!! Ya, I figured it was something i was doing. I was just wondering if anyone has ever had this problem and could help me out.

The numbering is fine, and i followed the steps. What happened was that #2 The insecure boot didn’t take the first time, so the TWRP failed. I subsequently tried only reloading the TWRP which ovbiously failed again. But I reloaded the insecure boot and then the TWRP right after, making sure my USB wouldn’t disconnect during the process and it worked this time. I guess the third time is the charm. Thanks for the timely replies and your help! Great webpage, will definitely be directing any interested friends here!

I can’t get my galaxy s3 to boot into twrp recovery mode. When i hold volume up+home+power buttons, i get android system recovery with several options under that and in the middle of the screen is yellow writing saying manual mode, appling multi-csc, applied the csc-code:vsw, successfully applied multi-csc and a picture of the android robot laying on his back with the front door on him open with a red triangle inside of it. Did i miss something or is something messed up.

I want to install a custom rom and get rid of the bloat ware. Could you help me with this?

I had a problem using method 3 from above. I have a Verizon SCH-I535 with 4.1.1.After getting root with method 3 I tried to use mobile odin to install clockwork mod recovery. When the phone rebooted I had a message to bring phone to Verizon. I was able to get the phone in download mode and re-flash stock 4.1.1. The problem is I now have custom binary downloads: yes (1 counts). I am not able to get proper root.

After I flash VRALEC.bootchain.tar.md5 I can’t flash cwmrecovery with odin, it fails. That’s where I am stuck. I can’t boot into recovery to fix bootloader. Any help would be great.

Thanks for your quick response. I tried it but it says it wasn’t compatible with my device. I’ve tried a few APN apps, however none of them work. I read somewhere that with this version of the software (4.1.2) you have to save the (APN) files to your SD card or something to that effect? If you have any ideas, I would greatly welcome them. Right now I have bad service and no data – if you know of any place to find good APN settings for AT&T (NET10) I would appreciate the help also!

I know it’s a lot to ask, but thought I would give it a shot! Thank you in advance! I used method 3 since i have the VRBMF1 build. But now I’m having an issue where when when my phone resets it makes me relog into gmail and go through the whole startup process every time. Is there I way to alleviate the issue? I haven’t been able to flash any custom ROMs (and don’t plan to) until I fix this issue.

Probably for the best. To give you some more background, I received my new device today (under warranty I was able to get a new phone) and only apps I had install prior to rooting was the easy backup and dropbox app. Any suggestions? Thanks in advance. Hi Matt, Thanks for the appreciation! I always try to be clear while I write such tutorials because I know what and how much is at stake.

It is the trust of our users that keeps us alive. I am really happy that it helped you get out of that mess.

Everybody likes nice words. 🙂 Your phone automatically took you to the Download Mode and it indicated that it was not just a bootloop. Anyway, let’s now come to your questions: 1. It is not easy to escape the notorious updates sent by Verizon. It requires some modifications in some system files to disable the feature.

Also, you can postpone or cancel the update when you are asked to do it. The best way, however, is to install a good custom ROM that eliminates any such possibility of OTA being downloaded to your phone. You can find some nice ones here: 2.

If you have root and CWM installed on your device, you need not convert your ROMs to.tar format. Just backup them using CWM recovery.

Here is a detailed guide for more information: You can also update your rooted Verizon S3 from this post: 3. The second method is meant for recovering S3 from a soft-brick or corrupt bootloader state. It replaces the non-functioning bootchain with a working one to get back the device to normal state. I hope I was able to address all your concerns. Regards from DroidViews and keep visiting! Hi Rakesh, Wonderful! Thank you very much.

Just the first step was enough to get me out of the bootloop. Now back to the back-ground of this mess. It is not that I got scared of the Verizon message about un-approved software. It was a kind of bootloop too, because I could not use the phone or do anything except getting into download mode. I did not want to flash a stock ROM, but I could not find a better advice as to what to do.

And I did look for the latest version of ROM(VRBMF1), but it was not available in a format that Odin could use. I had a suspicion that the ROM version I used was old, how old, I had no idea. 1- Now, please tell me, when I re-root my phone, someday I may run into that Verizon un-authorized software screen again. If it so happens, how should I proceed to get out of it?

2- How to convert the ROM files to *.tar / make them Odin compatible? 3- The second method that you proposed for me to try to get out of bootloop, how does it work? And once again I must thank you not only for my help but also for the way you write, clear and to the point, no ambiguity! I will keenly await your response to my questions, because want to find a remedy for the Verizon message first before I root again.

Regards, Matt •. Hi Matt, you have installed a very old ICS firmware. The message you got from Verizon is just a normal thing when you have rooted and unlocked the bootloader. Installing the firmware has corrupted the bootloader and therefore you are not able to get into recovery mode. Here are 2 possible remedies to get out of the situation your device is in: 1.Download this firmware: and install it using this guide: In case it does not help you, try the following: 2. Download the following files: (this is a torrent file. Install UTorrent software on you PC and download the file.

Launch ODIN 2. Select only the following box: F.

Reset Time 3. Flash the VRALEC bootchain in the PDA section and wait for a PASS message 4. Reset ODIN 5.

Flash the VRALF bootchain in the PDA section and wait for a PASS message 6. Reset ODIN 7. Put the stock.vzw_root66.tar in the PDA section 8.

Select the following boxes: Auto Reboot, F. Reset Time, Nand Erase All 9. Click the start button on Odin. Hi, Thanks for the excellent articles. There is another aspect that need to be touched on in detail and for which I cannot find much help. I used your technique and rooted my Verizon Galaxy SIII and installed custom recovery. At the end of all this my system version was RBMF1.

A few days later I got stuck with Verizon message that I had software not approved by Verizon. So I had to un-root, I used the latest Stock ROM available: HOME_I535VRALF2_I535VZWALF2_618049_REV09_user_low_ship.tar but then I got stuck in a bootloop, from which I cannot come out, I cannot get into recovery either. I have flashed the above Stock ROM several times already but I cannot get out of the boot loop at the 4GLTE animation screen. (I also have a full backup on an external SD card but do not know how to use it to get out of the bootloop because I cannot boot into any kkind of recovery) Do you have any advice for me? Thanks Matt •.

Hey man, so far this is the best info I’ve found for the Verizon s3. Thanks for taking the time to put this together and answer our questions. I’m brand new to android and rooting but I have been reading pages and pages of tuts and in the end I used casual, which I believe is method 3, to root my phone and it worked like a charm! But then I accepted an OTA update because I didn’t know any better: ( Anyway I lost root and superuser but my phone updated fine thank goodness. Should I root again using the same method? The bootloader is still unlocked.

Again, Thank you so much for your time effort, it’s greatly appreciated! My friend, this is an awesome tutorial. In and out in about 15 minutes and I’m rooted. The hardest thing about it, for me, was the button combinations. Piece of cake, really.

The only point of confusion for me was at the end of step 9. I wasn’t sure there whether I was supposed to unplug the phone from the computer or not. I read ahead and it looked like that was the case. Otherwise, that was very cool. In installed Titanium Plus (the main reason I root) and now I can have all sorts of fun. Thanks a bunch. Maybe i need to back up a little, im running windows 8 ultimate, i am connected to my G3 with the usb cable, I started with just dl the su file and i opened the phone location sd card, doped the zip file and went on with the steps.

The card shows mounted. I then followed the steps up to loading in clockwork, the file is not listed. Restart the phone and went into libraries, then to the phone and looked at both sd card and internal storage, moved the file from one to the other.

Started again and same thing. So its got to do with dropping the file in the sd card not sure on another way to load the file to the sd card not sure how to do the ROM and transfer •. I followed the directions and i got to where i load clockworkmod recovery, I can get it to load however where I go to do the install zip from sdcard>choose zip from sdcard” and select the “SuperSU_Bootloader_FIXED.zip” file. The file is not there.

I restart and open the sd card dir on my pc and i see the zip file. I got back into clockworkmod and its not showing up even looked in ext sd card and still not there.

Its named CWM-SuperSU-v0.99 compressed (zipped) Folder located in SCH-I535 >Card. The zip shows its on the card but not coming up in clockwork. What am i missing? The war between me and this installation was won!!! Now I have the Jelly bean 4.2.2 Carbon on my Galaxy S3 (sch-i535). Much appreciation for that. Man you just don’t know what I had to go through in order to get it though.

I started the process and 2 or 3 times the installation was aborted telling me that something was corrupted. I was already tired physically and about to be mentally drained wrestling with this thing. Only to find out that the browser which I used to download the file with didn’t download completely but was showing me in my files folder that the file was downloaded. Thus the reason for the file corruption issue. So I had to delete those downloads and install Firefox from the Apps store and then the file was downloaded successfully using firefox. After I did that, I was able to go through the back up process again at the cwm recovery, do the wiping and formatting, and the installation went through like it was never happening in the first place. So now, the browser that caused me the problem in the first place is no longer my default browser because it caused me to loose hours of time that I could have done other things with.

But really and truly, there is no loss in learning from your mistakes. Nevertheless, I appreciate your patience and passion in what you do. No Skill Delay Hack Ragnarok Online. Take it easy. One more thing though. Where can I go to learn more about using this ROM? Because it has so many functions that I would need a guide to learn to use. This is my update.

I wasn’t able to install the 4.2.2. Maybe I clicked on the wrong zip file. The one I downloaded was the “gapps-jb-20130301-sig.zip”. Is that the right file? Nevertheless, I went ahead and tried the jb13 from the other site that you gave and it worked fine, except for an error message that I keep on getting when the system alerts me that there is an OTA update for jellybean ROM version 0.1.5. It just gives me an error message saying it can’t download when I try to click on it.

Other than that it works fine and fast as well. This is my update.

I wasn’t able to install the 4.2.2. Maybe I clicked on the wrong zip file. The one I downloaded was the “gapps-jb-20130301-sig.zip”. Is that the right file? Nevertheless, I went ahead and tried the jb13 from the other site that you gave and it worked fine, except for an error message that I keep on getting when the system alerts me that there is an OTA update for jellybean ROM version 0.1.5.

It just gives me an error message saying it can’t download when I try to click on it. Other than that it works fine and fast as well. I rooted the phone but there was a part that I came to at instruction number 15, which says, “When it’s done go back and select “reboot system now”. But before your phone boots, pull out the battery and place it back after a few seconds.” After I hit **back** and select “reboot system now”.

The next thing that popped up said: “ROM may flash stock recovery on boot. THIS CAN NOT BE UNDONE. – NO – YES – Disable recovery flash” Nevertheless, I tapped on **back** and then it was about to reboot so I took out the battery and then replaced it and powered on the phone. It went through fine, but I wanted to know. What was I supposed to do when I had gotten that message?

It is only for sch-i535 on 4.1.1/4.1.2. Update your device to JB first. Here is the 4.1.1 OTA update package: Copy it to external SD and Install it from stock recovery. Turn off device, hold Volume up+home+poer keys for a few seconds till the phone vibrates and you see Samsung logo, release the Power key and keep other 2 keys pressed. In recovery, use volume keys to scroll and power key to select. Choose install update from external sd, find the file and install it.

You device’ll be updated to JB and then you can use the tutorial above. I do not think that you can get the OTA while being rooted (this doesn’t apply if you installed a pre-rooted firmware or used Triangle Away). You must unroot your SCH-I535 first to get the new update and then root it later again. The reason why I recommended installing a custom ROM is sound too.

It’ll save you from going into a lot of drill since you have already a rooted device. A good custom ROM (based on VRBMB1 4.1.2) can let you enjoy all new features + many additional things. If you are rooted, it doesn’t make a difference whether you are on rooted stock or a custom ROM. Nope, not spam, I have no affiliation with that root site I linked. I did screw up the question a bit though: I’m rooted up to 4.1.1 and there’s the 4.1.2 OTA available is what I meant to say.

So, you’re saying to just do a nandroid backup first, then either just let it update the OTA or install a custom ROM instead? According to a lot of the comments on that page though, the OTA did go through, but it unrooted.

So, if I just let it take the OTA though, then I just re-root using your guide? Thanks again •. Hi, though your comment sounds more like a spam, your question is genuine. Here is the answer- I do not see problem with updating the new firmware. It will unroot your device and you’ll need to root it again.

Since you already have CWM on your phone, do not forget to backup the current ROM before updating. You can also try a custom ROM that already has the features of the 4.1.2 OTA update. As for preserving apps, data and settings, I always recommend not to restore apps or settings using Titanium backup sort of apps. Doing this’ll make your phone laggy. Another thing, you will not receive the OTA because of the root factor.

I’ll recommend you trying a custom ROM: •. Thank you very much for this article:) just one more thing, if i ever want to flash something else, do i have to flash custom bootchain first? In other words, does having stock bootchain lock down the device to the point where i can’t modify it via odin/CWM unless i flash custom bootchain?

Also, i was little confused with the last part of your reply. Does it do the same thing TriangleAway does; when you flash back to stock bootchain, or does it make the phone think it’s counter is at 0 without actually resetting it? Becasuse my counter is still at 3.