Caterpillar Forklift Serial Numbers Years
Hi Can anyone help me as to what year, model and lifting specs this forklift would have? There are no tags anywhere on it.
4 cylinder gas flat head motor, I have only seen these forklifts on the internet, but they were different, this one has little fender flares, all the other ones are smooth over the wheels. It has a 2 speed transmission, and manual steering. Owner said it was a 5000 lb lifting capacity, but it looks kinda small, but what do I know about these older machines. I need a forklift with atleast 4000 lb lifting capacity, and I came across this one. Heredis Mac Serial Junkie more. Are parts hard to get? The breaks do not work.
The top of the mast cylinder leaks alot of fluid when its almost down. This forklift runs and starts very easy, abit hard to steer when not moving. Thankyou for any help you guys might be able to give. More pictures here too. The serial number should be stamped on the frame at the bottom of the cowl facing the mast- the other way to determine this is to measure the distance from the center line of the drive wheel hubcap to the centerline of the steer wheel hubcap with the wheels perfectly straight and it should be either 48 or 50'- this makes it a 480 or 500P, P standing for Pneumatic.
The rest of the stamped numbers are the production number and the year made.Cat is the current dealer and will not be of much help on parts- however you can still find some parts if you look around. I worked for Towmotor during this era- that just makes me AN OLD FART! I have one like it, only solid tire and no little wrap-around fender flares. That is likely part of the pnue option I bet.??? Also - your motor must be diff than mine. Your distributor come out in a different place.
Stock Number: EQ-5YM00080 Type: Excavator Serial Number: 5YM00080 Young boom, stick, and knuckle. Machine runs. Request a Quote. MANUFACTURERCaterpillar; MODEL330L; YEAR1994; LOCATION154000.98. Stock Number: EQ-TBM00171 Type: Forklift Serial Number: TBM00171. Request a Quote. For Warehouse & Factory Managers. Forklift Users Guide. Never seen anything like it! Loaded with valuable information I will use in my business every day.
This is prolly a really good thing as I found recently on here that mine is likely no worth fixing if she jumps a tooth aggin. I really like this little truck and was 1/2 prep'd to fix it up, untill the motor issue popped up. Mine - with solid tires will pick 4000 if you grab it back on the forks.
This one being a pneumatic may struggle with that? Unless possibly this one is a slightly bigger model, but it looks exactly the same. I really like it inside the shop where it's tight, but I finally got a nice 8K to use where possible. My brakes haven't werked in several yrs either. Has a leaky wheel cyl I think.
Just grind the gears. BTW - Yes - it is a Towmotor brand.
I think it says that on the hydro valve unit.??? I thought that it was a Clark for many yrs as that is what my steering wheel says. But once I had it in the shop and they informed me that it was a Towmotor.
And now I see where it says so. In your second pic you can just see the word Towmotor casted in the hyd valve stack cover. Mine is mostly red too. But I think there is a lot of yeller underneath, not including whatever it has 'traded' over the yrs. You may be able to pick 4000# possibly if it has 32 or 36' forks? Mine had a broken fork when I got it.
I built a rack for it that accepted new style forks and got some 48'ers for it. It won't pick 4000 on the tips, but maybe 1/2 way back. That is with a 15' spacing from the front of the mast (fork) to the axle C/L. (just measured it just now) I am guessing that this ones pnue axle is set back a bit more.??? Making it less able to lift. ----------------- Think Snow Eh!
I can only guess the year in a range between 1952 and 1957 Continental engine, most likely an F140, but could be an F162 If you get positive ID let me know how close I am. The packing nut on the lift cylinder is made to tighten so it compresses the seal pack and stops leaking.IF the seals are still good. If not, get a new pack.
Master cyl should be available on EBAY or other parts house. Compare it to catalog photos. DO fix the brakes. Less work than fixing the trans, as any gears you may strip or break will not be available. Thats great info The forks are 48' One looks as though it was repaired from being broken in the past, and one has gussets on it. The words towmotor are on the counter weight, hubcaps,and hydraulic valve More pictures at the link below incase you missed them As for power steering, I have read that a ford granada power steering cylinder would work well, and after seeing one, it looks easy to adapt to the towmotor.
The other forklifts I have seen that are similar have been advertised as 4000 pound capacity. I have to go away for 1 week, so I won't be able to go check out this forklift again till I'm back.
Or reply to any other questions. Your replies have been helpful. I think this toy is very cute, and resembles this forklift very well, even the fender flares. L heads (Flatheads) of any make can usually be spotted from a ways away. This one doesn't just look like a continental, it is one.90% sure it's an F140.
The reason I'm sure, is I have 2 forklifts that have continentals in them. Plus I just worked on, then sold a 3rd.a 1957 Towmotor that looked almost exactly like this one in the pics, and it had an F140 in it.
A friend is in the welder repair business, and works on a lot of old Lincoln, Hobart, and Airco portable welders and many of them use continental engines. I'm pretty sure I know what Y112's F140's and F162's look like outside and inside as well as the various exploded views when they are strung around the shop apart. Went and saw the forkllift again.
The serial numbers were extrememly hard to read even with scraping off all the paint, the metal stamped numbers were deformed abit. Hopefully this is all there was I couldn't tell if there were any more numbers after what I had written down 19668 stamped above the letter/numbers E or L 15300 can't tell which letter it was Distance between center of axles is 48' The guy wants $1600 for it.
There have been no forklifts that can lift 4000 pounds for under $4000 in the last 5 months in our province. I have been watching like a hawk for a forklift around the $4-5000 price range. There are lots of forklifts though for $4500+, this one even though it is cheaper I am somehow drawn to its age, and simplicity. Its kinda neat to have an old vintage machine.
I would only maximum lift 4000 pounds with it, on a packed gravel driveway, dual wheel would be nice to have, but I can add duals later. What are your opinions on operating older machines? Are there many parts that are not available for these old forklifts that make owning one a headache? Or can most parts be sourced via the internet?
I have to make a decision to buy or pass on this towmotor, and any advice would be very helpful. I am very handy, can make almost any part if needed on my mill or lathe. So I am not scared to own an old piece of history. I just don't want to have a piece of equipment that allways seems to be broken, and I have to fit in time to fix it, time is something I do not have much of. I would rather just go buy the part and replace it.
I really appreciate all what you guys have said about this forklift. After you initially pour over it with TLC and needed maintenance due to neglect, it should be good to go for many years if you treat it like you -own- it, and you're not a gear grinding slam-banger on it. Of course you'll put $1200 in large bills in your right front pocket to present to it's present owner.(you can begrudgingly go UP from there) find and point out any and all faults and generally speak in a moaning tone about how much money and sweat you'll have to invest in the ugly beast.keep shaking your head 'no' as you point out the faults.
I don't freely share my acquisition tactics with just -anybody- so consider this a rare tip. The 48' wheelbase will make it a Mod. 480P which should be a 4000# capacity. None of the other numbers give me any clue as to the year or production #. It sounds like you are in a sellers market and will have to try to get it at the best figure you can and hope everything works out OK?
They are pretty simple and basic trucks. If you find thr ser.# stamped on the front of the frame it will start '480P' and the next 2 numbers will be the year and the last 3 or 4 will be the production #. Hope this helps? She arrived today, kinda neat to have an old forklift like this. Bummer, I missed the broken fork and gussets welded on the side of it. Any body know of an online used forklift forks seller? The brakes don't work, I notice there is a bolt sticking out of the backing plate close to the brake bleed valve, is this to adjust the brake shoes?
It has a new master cylinder, just nothing on the pedal, which is on the floor, maybe it wasn't blead properly, and shoes need to be adjusted. The new master cylinder is mounted on an angle, is this the way they are, or is this one the wrong one? And it needs to be level? So tonight I tried to bleed it, and it is a pain in the butt. I get pressure, then it fades away.
There is still air in the MC. Maybe have to jack up the rear of the forklift to get it level, then try to bleed it again.
Last edited by Billyisgr8; at 02:23 PM.
YEAR: 2008 CATEGORY: SERVICE VEHICLE ~~2008 FORD F-350 XLT SUPER DUTY AMBULANCE VIN#1FDWF36R58EE18886 MILEAGE-154,976 6.4LITRE POWERSTROKE A/C,TILT,CRUISE,POWER WINDOWS,LOCKS,AND MIRRORS,INTERIOR CLEAN,AUTO. TRANSMISSION,(4) AUX.
POWER SLOTS IN CAB,ON COMMAND EMERGENCY CONTROLS,OXYGEN COMPARTMENT ON BODY,DUAL REAR TIRES,110 POWER INVERTER,WHELEN SIREN AND RADIO,(7) STORAGE BAYS, TIRES- GOOD, (1) FLAT GLASS-GOOD TRANSMISSION-GOOD VISIBLE DEFECTS-NONE BODY PANELS-GOOD CAB-CLEAN LEAKS-NONE VISIBLE LOCATED IN SC. YEAR: 1988 MAKE: MACK MODEL: RD688S TRI AXLE DUMP TRUCK CATEGORY: DUMP TRUCK SERIAL NUMBER: 1M2P141C8JW006392 RATING: AS-IS 1988 MACK RD688S TANDEM AXLE DUMP TRUCK, sn 1M2P141C8JW006392, 828227 miles, POWERED BY MACK E6 ENGINE, 12 SPEED TRANSMISSION, 73280 gvw, WAS A TRIAXLE BUT LIFT AXLE WAS TAKEN OFF, STEEL BED, GOH 7-15, LOCATED IN CENTRAL, PA. ***DISCLAIMER: IT IS THE BUYERS RESPONSIBILITY TO CHECK AND VERIFY ALL SERIAL AND VIN NUMBERS, WORLDNET AUCTIONS DOES NOT WARRANT NOR GUARANTEE ANY YEAR MODELS. ALL ITEMS MUST BE PAID FOR IN 48 HOURS, NO EXCEPTIONS. ALL ITEMS MUST BE PICKED UP WITHIN 2 WEEKS OR STORAGE FEES WILL ACCRUE.
ALL ITEMS ARE SOLD AS IS, WHERE IS***. YEAR: 1989 MAKE: MACK MODEL: RD690S TRI AXLE DUMP TRUCK CATEGORY: DUMP TRUCK SERIAL NUMBER: 1M2P198C8KW005148 RATING: AS-IS 1989 MACK RD690S TANDEM AXLE DUMP TRUCK, sn 1M2P198C8KW005148, 725218 miles, POWERED BY MACK E6 350 ENGINE, 10 SPEED TRANSMISSION, 73280 gvw, WAS A TRI AXLE BUT LIFT AXLE WAS TAKEN OFF, STEEL BED, CHAIN LIFT GATE, GOH 7-19, LOCATED IN CENTRAL, PA. ***DISCLAIMER: IT IS THE BUYERS RESPONSIBILITY TO CHECK AND VERIFY ALL SERIAL AND VIN NUMBERS, WORLDNET AUCTIONS DOES NOT WARRANT NOR GUARANTEE ANY YEAR MODELS. ALL ITEMS MUST BE PAID FOR IN 48 HOURS, NO EXCEPTIONS. ALL ITEMS MUST BE PICKED UP WITHIN 2 WEEKS OR STORAGE FEES WILL ACCRUE. ALL ITEMS ARE SOLD AS IS, WHERE IS***.
MAKE: MACK CATEGORY: DUMP TRUCK RATING: AS-IS 1990 MACK TANDEM AXLE DUMP TRUCK, vin 1M2P141C9LM009042, POWERED BY MACK E350 ENGINE, 627610 miles, 12 SPEED TRANSMISSION, 73280 gvw, WAS A TRI AXLE BUT LIFT AXLE WAS TAKEN OFF, ALUMINUM BED, GOH 5-24, LOCATED IN PA. ***DISCLAIMER: IT IS THE BUYERS RESPONSIBILITY TO CHECK AND VERIFY ALL SERIAL AND VIN NUMBERS, WORLDNET AUCTIONS DOES NOT WARRANT NOR GUARANTEE ANY YEAR MODELS. ALL ITEMS MUST BE PAID FOR IN 48 HOURS, NO EXCEPTIONS. ALL ITEMS MUST BE PICKED UP WITHIN 2 WEEKS OR STORAGE FEES WILL ACCRUE. ALL ITEMS ARE SOLD AS IS, WHERE IS***. YEAR: 2007 MAKE: INTERNATIONAL MODEL: 9200i CATEGORY: TRUCK TRACTOR SERIAL NUMBER: 2HSCEAPR97C372097 RATING: AS-IS 2007 INTERNATIONAL 9200i Conventional, 72 Inch Hi-Rise Sleeper w double bunk, Cummins ISX Engine, 450 H.P., Engine Brake, Automatic Transmission, 40,000 Lb. Rear Ends, 3.36 Ratio, Air Ride Suspension, Dump Valve, Hydraulic Power Steering, Air Conditioned, Chrome Bumper, Dual Aluminum Fuel Tanks, Single Chrome Stack, Exterior Visor, Roof Air Fairing, Cab Extenders, Stainless Steel Quarter Fenders, AM/FM Radio, CD Player, Tilt & Telescoping Steering Wheel, Cruise Control, Power Windows, Auxiliary Power Unit, Air Slide 5th, 222 Inch Wheel Base, 11R22.5 Tires Front, 22.5 Super Single Tires Rear, Aluminum Disc Wheels,Super Singles #18905.
YEAR: 1984 MAKE: MACK MODEL: DM685S CATEGORY: TRUCK TRACTOR SERIAL NUMBER: 1M2B120C5EA0 MACK DM685S FLATBED W/ DETACH POLE BOLSTERS DUAL AXLE,ENGINE-EM6-237,TRANS-MAXITORQUE,LENGHT OF BODY- 18', MILEAGE-108,423 SHOWING DISCLAIMER: IT IS THE BUYER'S RESPONSIBILITY TO CHECK AND VERIFY ALL SERIAL AND VIN NUMBERS, WORLDNET AUCTIONS DOES NOT WARRANT NOR GUARANTEE ANY YEAR MODELS. ALL ITEMS MUST BE PAID FOR WITHIN 48 HOURS, NO EXCEPTIONS. ALL ITEMS MUST BE PICKED UP WITHIN 2 WEEKS OR STORAGE FEES WILL ACCRUE. ALL ITEMS ARE SOLD AS IS, WHERE IS.
YEAR: 1987 MAKE: DRESSER MODEL: A450E MOTORGRADER CATEGORY: MOTOR GRADER SERIAL NUMBER: 11568 RATING: RIDE-N-DRIVE # DRESSER A450E MOTORGRADER, S/N 11568, 4,967 HOURS, MID MOUNTED SCARIFIER, 12' MOLDBOARD, ECAB W/HEAT/AIR, ALL GOOD GLASS, INTERNATIONAL DIESEL ENGINE, DECENT RUBBER, VERY WELL MAINTAINED MACHINE, TIGHT AND DRY, RIDE N DRIVE, LOCATED IN SC DISCLAIMER: IT IS THE BUYER'S RESPONSIBILITY TO CHECK AND VERIFY ALL SERIAL AND VIN NUMBERS, WORLDNET AUCTIONS DOES NOT WARRANT NOR GUARANTEE ANY YEAR MODELS. ALL ITEMS MUST BE PAID FOR WITHIN 48 HOURS, NO EXCEPTIONS. ALL ITEMS MUST BE PICKED UP WITHIN 2 WEEKS OR STORAGE FEES WILL ACCRUE. ALL ITEMS ARE SOLD AS IS, WHERE IS. A 2 1/2% LATE FEE WILL BE ADDED TO ALL OUTSTANDING BALANCES IF NOT PAID IN FULL WITHIN 48 HOURS OF AUCTIONS CLOSE OR RECEIVING OF INVOICE. YEAR: 1985 MAKE: FORD MODEL: FT8 CATEGORY: FLATBED TRUCK SERIAL NUMBER: 1FDYL80U9FVA FORD FLATBED-ENGINE CAT 3208,TRANS-FULLER ROADRANGER 8 SPEED,LENGHT OF BODY-17' 8',MILEAGE SHOWING ON METER-138,666, DISCLAIMER: IT IS THE BUYER'S RESPONSIBILITY TO CHECK AND VERIFY ALL SERIAL AND VIN NUMBERS, WORLDNET AUCTIONS DOES NOT WARRANT NOR GUARANTEE ANY YEAR MODELS. ALL ITEMS MUST BE PAID FOR WITHIN 48 HOURS, NO EXCEPTIONS.
ALL ITEMS MUST BE PICKED UP WITHIN 2 WEEKS OR STORAGE FEES WILL ACCRUE. ALL ITEMS ARE SOLD AS IS, WHERE IS.
MAKE: CATERPILLAR MODEL: 950 CATEGORY: WHEEL LOADER RATING: AS-IS 1972 CATERPILLAR 950 WHEEL LOADER W/ PEMBERTON RAKE, S/N 81J5074, OROPS, GP BUCKET, MP BUCKET, NICE CLEAN UNIT, READY TO GO TO WORK. LOCATED IN SC, ***DISCLAIMER: IT IS THE BUYER'S RESPONSIBILITY TO CHECK AND VERIFY ALL SERIAL AND VIN NUMBERS, WORLDNET AUCTIONS DOES NOT WARRANT NOR GUARANTEE ANY YEAR MODELS.
ALL ITEMS MUST BE PAID FOR WITHIN 48 HOURS, NO EXCEPTIONS. ALL ITEMS MUST BE PICKED UP WITHIN 2 WEEKS OR STORAGE FEES WILL ACCRUE. ALL ITEMS ARE SOLD AS IS, WHERE IS.*** # 103434. YEAR: 2009 MAKE: KENWORTH MODEL: T800 TRUCK TRACTOR CATEGORY: TRUCK TRACTOR SERIAL NUMBER: 1XKDD47 RATING: AS-IS 2009 KENWORTH T800 SLEEPER TRUCK TRACTOR, S/N 1XKDD47, MILEAGE-801,375-CUMMINS ISX-485 ENGINE,EATON FULLER 10 SPEED,ALUMINUM WHEELS,CRUISE,ENGINE BRAKE,AERO CAB SLEEPER,NEW RUBBER,DIFF.
LOKC,DUAL FUEL TANKS,TIRE SIZE-275/80R22.5, LOCATED IN SC., TRUCK#99 ***~~DISCLAIMER: IT IS THE BUYER'S RESPONSIBILITY TO CHECK AND VERIFY ALL SERIAL AND VIN NUMBERS, WORLDNET AUCTIONS DOES NOT WARRANT NOR GUARANTEE ANY YEAR MODELS. ALL ITEMS MUST BE PAID FOR WITHIN 48 HOURS, NO EXCEPTIONS. ALL ITEMS MUST BE PICKED UP WITHIN 2 WEEKS OR STORAGE FEES WILL ACCRUE. ALL ITEMS ARE SOLD AS IS, WHERE IS.*** # 103637. YEAR: 2010 MAKE: KENWORTH MODEL: T800 TRUCK TRACTOR CATEGORY: TRUCK TRACTOR SERIAL NUMBER: 1XKDD49X5AJ268779 RATING: AS-IS 2010 KENWORTH T800 CONVENTIONAL TRUCK, S/N 1XKDD49X5AJ268779, MILEAGE-719,200,CUMMINS ISX-485 ENGINE,EATON FULLER 10 SPEED,COLD A/C,DIFF.
LOCK,ENGINE BRAKE,AERO CAB SLEEPER,DUAL FUEL TANKS,GOOD/NEW RUBBER, LOCATED IN SC., ***~~DISCLAIMER: IT IS THE BUYER'S RESPONSIBILITY TO CHECK AND VERIFY ALL SERIAL AND VIN NUMBERS, WORLDNET AUCTIONS DOES NOT WARRANT NOR GUARANTEE ANY YEAR MODELS. ALL ITEMS MUST BE PAID FOR WITHIN 48 HOURS, NO EXCEPTIONS. ALL ITEMS MUST BE PICKED UP WITHIN 2 WEEKS OR STORAGE FEES WILL ACCRUE.
ALL ITEMS ARE SOLD AS IS, WHERE IS.*** # 103715. YEAR: 2014 MAKE: VOLVO MODEL: EC220DL HYDRAULIC EXCAVATOR CATEGORY: EXCAVATOR SERIAL NUMBER: VCEC220DJ00210865 RATING: AS-IS 2014 VOLVO EC220DL EXCAVATOR, S/N VCEC220DJ00210865, 815 HRS, ENCLOSED CAB WITH A/C, ROCKLAND THUMB, 32INCH SHOES, DOES NOT RUN, HAS BEEN EXPOSED TO FLOOD WATER, LOCATED IN LA., ***DISCLAIMER: IT IS THE BUYER'S RESPONSIBILITY TO CHECK AND VERIFY ALL SERIAL AND VIN NUMBERS, WORLDNET AUCTIONS DOES NOT WARRANT NOR GUARANTEE ANY YEAR MODELS. ALL ITEMS MUST BE PAID FOR WITHIN 48 HOURS, NO EXCEPTIONS. ALL ITEMS MUST BE PICKED UP WITHIN 2 WEEKS OR STORAGE FEES WILL ACCRUE.
ALL ITEMS ARE SOLD AS IS, WHERE IS.*** #107822. MAKE: JOHN DEERE MODEL: 850B CATEGORY: CRAWLER DOZER SERIAL NUMBER: T0850BL722141 RATING: AS-IS JOHN DEERE 850B LONG TRACK DOZER, S/N T0850BL722141, OROPS OROPS WITH SCREENS 501 HRS HYDRO STAT TRANS, MACHINE ONLY, NO PLOW OR SPOOL, CRANKS AND RUNS, MAY HAVE BEEN EXPOSED TO FLOOD WATERS, LOCATED IN LA., ~~ ***DISCLAIMER: IT IS THE BUYER'S RESPONSIBILITY TO CHECK AND VERIFY ALL SERIAL AND VIN NUMBERS, WORLDNET AUCTIONS DOES NOT WARRANT NOR GUARANTEE ANY YEAR MODELS. ALL ITEMS MUST BE PAID FOR WITHIN 48 HOURS, NO EXCEPTIONS. ALL ITEMS MUST BE PICKED UP WITHIN 2 WEEKS OR STORAGE FEES WILL ACCRUE.
ALL ITEMS ARE SOLD AS IS, WHERE IS.*** # 107827 (18). YEAR:2011 MAKE: JOHN DEERE MODEL: 750J CRAWLER DOZER CATEGORY: CRAWLER DOZER SERIAL NUMBER: 018472 RATING: AS-IS 2011 DEERE 750J LGP CRAWLER DOZER, S/N 018472, ONLY 5,051 HOURS, ENCLOSED CAB, W/ REAR ALLIED WINCH, COLD A/C, HEAT, RADIO, REAR FORESTRY SCREEN, 6-WAY BLADE, DRAWBAR, 60% PLUS UNDERCARRIAGE, ROOT RAKE EAR MOUNTS, LOCATED IN SC, ***DISCLAIMER: IT IS THE BUYER'S RESPONSIBILITY TO CHECK AND VERIFY ALL SERIAL AND VIN NUMBERS, WORLDNET AUCTIONS DOES NOT WARRANT NOR GUARANTEE ANY YEAR MODELS. ALL ITEMS MUST BE PAID FOR WITHIN 48 HOURS, NO EXCEPTIONS.
ALL ITEMS MUST BE PICKED UP WITHIN 2 WEEKS OR STORAGE FEES WILL ACCRUE. ALL ITEMS ARE SOLD AS IS, WHERE IS.***. YEAR: 1987 MAKE: DRESSER MODEL: A400E MOTORGRADER CATEGORY: MOTOR GRADER SERIAL NUMBER: C11694 RATING: RIDE-N-DRIVE 1987 DRESSER A400E MOTORGRADER, S/N C11694, HOURS 3,564, CAB WITH MID-MOUNTED SCARIFIER, INTERNATIONAL 6CYL DIESEL, 13.00-24 TIRES, FRONTS 60% and 15%, REARS 30%, 12' MOLDBOARD, VERY WELL MAINTAINED, TIGHT, DRY MACHINE, RUNS AND OPERATES GREAT, RIDE-N-DRIVE, LOCATED IN SC. ***DISCLAIMER: IT IS THE BUYER'S RESPONSIBILITY TO CHECK AND VERIFY ALL SERIAL AND VIN NUMBERS, WORLDNET AUCTIONS DOES NOT WARRANT NOR GUARANTEE ANY YEAR MODELS. ALL ITEMS MUST BE PAID FOR WITHIN 48 HOURS, NO EXCEPTIONS.
ALL ITEMS MUST HAVE A 48 HOUR NOTICE BEFORE ITEMS CAN BE PICKED UP*** #18596. YEAR: 2006 MAKE: VOLVO MODEL: CONVENTIONAL CATEGORY: TRUCK TRACTOR RATING: AS-IS 2006 VOLVO CONVENTIONAL, S/N 4V4NC9GH66N372391, MILEAGE-979,247,ENGINE-VOLVO VE D12-465,EATON FULLER-9 SPEED,CRUISE,POWER WINDOWS,LOCKS AND MIRRORS,SLEEPER COMES WITH DINNETTE TABLE,DOUBLE BUNKS,AND STORAGE DRAWERS, LOCATED IN SC., ***DISCLAIMER: IT IS THE BUYER'S RESPONSIBILITY TO CHECK AND VERIFY ALL SERIAL AND VIN NUMBERS, WORLDNET AUCTIONS DOES NOT WARRANT NOR GUARANTEE ANY YEAR MODELS. ALL ITEMS MUST BE PAID FOR WITHIN 48 HOURS, NO EXCEPTIONS. ALL ITEMS MUST HAVE A 48 HOUR NOTICE BEFORE ITEMS CAN BE PICKED UP*** # 103635. YEAR: 2008 MAKE: FREIGHTLINER MODEL: COLUMBIA CATEGORY: TRUCK TRACTOR SERIAL NUMBER: 1FVJA6CK28L294400 RATING: AS-IS 2008 FREIGHTLINER COLUMBIA SLEEPER TRUCK TRACTOR, S/N 1FVJA6CK28L294400, MILEAGE-689,666:ENGINE-DETROIT 60 SERIES,EATON FULLER 10 SPEED,WET LINE TANK ONLY,CRUISE,TILT,ENGINE BRAKE,POWER WINDOWS AND MIRRORS,PTO,DIFF.
LOCK,GOOD RUBBER,AM/FM/CD PLAYER,FIFTH WHEEL SLIDE,AIR SUSPENSION,DUAL FUEL TANKS, LOCATED IN SC., ***DISCLAIMER: IT IS THE BUYER'S RESPONSIBILITY TO CHECK AND VERIFY ALL SERIAL AND VIN NUMBERS, WORLDNET AUCTIONS DOES NOT WARRANT NOR GUARANTEE ANY YEAR MODELS. ALL ITEMS MUST BE PAID FOR WITHIN 48 HOURS, NO EXCEPTIONS.
ALL ITEMS MUST HAVE A 48 HOUR NOTICE BEFORE ITEMS CAN BE PICKED UP*** # 103402. YEAR: 2007 MAKE: FREIGHTLINER MODEL: COLUMBIA CATEGORY: TRUCK TRACTOR SERIAL NUMBER: 1FVJA6CK47DZ42940 RATING: AS-IS 2007 FREIGHTLINER COLUMBIA SLEEPER TRUCK TRACTOR, S/N 1FVJA6CK47DZ42940, MILEAGE-741,098:ENGINE-DETROIT 60 SERIES,EATON FULLER 10 SPEED,WET LINE,CRUISE,TILT,ENGINE BRAKE,DIFF. Onkyo Ta-630d Service Manual.
LOCK,AIR SUSPENSION,FIFTH WHEEL SLIDE,COLD A/C,AM/FM/CD PLAYER,PTO,DUAL FUEL TANKS,POWER WINDOWS AND MIRRORS, LOCATED IN SC., ***DISCLAIMER: IT IS THE BUYER'S RESPONSIBILITY TO CHECK AND VERIFY ALL SERIAL AND VIN NUMBERS, WORLDNET AUCTIONS DOES NOT WARRANT NOR GUARANTEE ANY YEAR MODELS. ALL ITEMS MUST BE PAID FOR WITHIN 48 HOURS, NO EXCEPTIONS. ALL ITEMS MUST HAVE A 48 HOUR NOTICE BEFORE ITEMS CAN BE PICKED UP*** # 103448. YEAR: 1978 MAKE: CHEVROLET MODEL: 70 FLATBED TRUCK CATEGORY: FLATBED TRUCK SERIAL NUMBER: 1GBM7D1E18V1 CHEVROLET 70 FLATBED TRUCK,S/N 1GBM7D1E18V126571, SINGLE AXLE,V-8 GAS ENGINE, CRANKS AND RUNS, LOCATED IN SC., ***DISCLAIMER: IT IS THE BUYER'S RESPONSIBILITY TO CHECK AND VERIFY ALL SERIAL AND VIN NUMBERS, WORLDNET AUCTIONS DOES NOT WARRANT NOR GUARANTEE ANY YEAR MODELS. ALL ITEMS MUST BE PAID FOR WITHIN 48 HOURS, NO EXCEPTIONS. ALL ITEMS MUST BE PICKED UP WITHIN 2 WEEKS OR STORAGE FEES WILL ACCRUE.
ALL ITEMS ARE SOLD AS IS, WHERE IS.*** #18635.